AccuTemp Vision Touch Operator's Manual
                                  | |
Contents
| 
2808 I MAINTENANCEGENERAL INSTRUCTIONSThe combi steamer must be kept clean, and remains of grease and foodmust be removed. Not following the maintenance instructions will void thewarranty.Only regular maintenance and adherence to all instructions will ensure thecombi steamer’s long life and cooking quality and guarantee trouble-freeoperation.For safe, trouble-free operation, the combi steamer and its accessoriesmust be inspected by an authorized service at least once per year.• Before starting any maintenance or repair works, thoroughlyreacquaint yourself with all instructions, restrictions andrecommendations in chapter SAFETY.• The warranty does not cover damage caused by unprofessionalcleaning and maintenance.• During the entire time of operation, the appliance must be subjectto regular checks, inspections and tests according to applicablenational regulations on operating this type of equipment.• The user must not rearrange any elements set by the manufactureror authorized service technician.• When opening the door, especially during steam operations, standin such a way that you cannot be scalded by the steam escaping fromthe open door. Open the door only partially and open fully only oncethe steam has escaped.• Do not spray water from the shower on the door’s glass and lights, ifthe internal temperature is above 200 °F — this may break the glass.• Before turning on the appliance, always check to see that the watervalve is open. Once work is over, close the appliance’s water valve!User's manual | Vision™ Touch Combi Steamers I 08 MAINTENANCE8.1 DAILY MAINTENANCEThe combi steamer must be cleaned daily with AccuTemp Products Inc.recommended cleaning agents. If the combi steamer is not cleanedadequately, grease on the chamber walls and can catch fire at hightemperatures. Damage caused by failure to follow these instructions is notcovered by the warranty!CLEANING THE COOKING CHAMBERFor everyday cleaning of the combi steamer, use one of the five programsin the Cleaning function, which you fill find in the combi steamer menu.When cleaning, use only the cleaning agents recommended by AccuTemp.When the combi steamer is being cleaned with a cleaner, its temperaturemust under no circumstances exceed 150 °F. At higher temperatures, thecleaner may bake on to the surface of the cooking chamber and form stainsresembling rust. The warranty does not apply to burnt-on cleaning agent.After cleaning the cooking chamber, leave the door ajar.• When washing the combi oven, always use safety gear and prescribedwork clothing (gloves, goggles, mask)! Protect your health!• When working with a cleaning agent always take great care to followthe recommendations in this manual. This will prevent hazards toyour health!• If the combi oven is not cleaned adequately, grease builds on thechamber walls and can catch fire at high temperatures. Damagecaused in this way voids the warranty!• After finishing manual washing, always use the spray hose tothoroughly rinse the cleaner from inside the cooking chamber. Ifthis isn’t done, the stainless-steel surface of the cooking chambercan distort and discolor when the appliance is used at hightemperatures. The warranty does not cover damage caused in thisway!• When the washing program has finished, check that the selectedwashing program was sufficient. If not, repeat the wash. Thewarranty does not cover damages caused by insufficient washing!• Never clean the combi oven using acid or leave acid near theappliance — this can damage the stainless-steel surface!• Do not use coarse or sand-based cleaning agents.• Do not use objects for mechanical surface cleaning (wire brushes,scrapers, knives).• Do not clean the combi oven using equipment that works with highwater pressure.• The warranty does not cover damages arising as a result of usingcleaners other than those recommended by the manufacturer, or asa result of using the cleaners recommended by the manufacturer incontradiction to the recommendations of the manufacturer!CLEANING THE DOOR SEALIf the door seal is soiled or greasy, clean it or remove it without using a tool(start at the corners) and wash it in water with cleaner. Once the seals aredry, reinstall them without using a tool (again, start at the corners). Afterwashing, leave the appliance’s door ajar so that the cooking chamber canair out. This also makes the door seals last longer. |
Related manuals for AccuTemp Vision Touch
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine