Mo de l#G S I - 200#GS I - 2001IN S TRU CTI O NM ANUA LPLEASEREADCOMPLETEINS TRUCTIONS BEFO REUSERSpecifications subject to change without notice.as applicableACCULABLimited WarrantyEffective Date: January 1, 2003Standard Terms and ConditionsModels: GSI seriesACCULAB warrants the product series "GSI" against defects in material andworkmanship to the original consumer for a peroid of twelve (12) months ora maximum of fifteen (15) months from date of sale to authorized ACCULABdistributor. The warranty includes parts, labor and return shipping charges tocustomer (ground freight).This specific warranty shall not apply to any product damaged due to accident,misuse, abuse, lightning strike, power surges, improper packaging for shipment toACCULAB, or service/modification by anyone other than an authorized ACCULABTechnician.The purchaser's sole remedy, ACCULAB and its suppliers sole liability are set forthherein. In no event shall ACCULAB or its suppliers be liable for any damages,incidental or consequential, expenses, lost profits, lost savings, or any other claimsdue to the use or inability to use the product/s. ACCULAB shall limit its obligationsunder warranty to a time not to exceed the original product warranty period setforth herein. This warranty gives you specific legal rights and you may have otherrights, which may be different from state to state.In the event that service is required, the Customer/Distributor should callACCULAB (800-656-4400, extension 8342) for proper return authorization. Theproduct must be delivered to ACCULAB, Service Division 6542 Fig Street, Arvada,CO., 80004 within the warranty period, freight charges prepaid. The customer isresponsible for product removal, installation and proper packing in order toprevent damage while shipping to ACCULAB Service facility.This limited warranty supersedes all other warranties pertaining to the ACCULABproducts, whether expressed or implied. Claims may be made by calling 800-656-4400/631-254-4299, by fax 800-356-0338/631-253-5472, or in writing to:ACCULABAttn: Warranty Administrator6542 Fig StreetArvada, CO., 80004(800-656-4400)ERROR CODEFollowing is a description of typical error codes that may appear onGSI-Series balances.1) L This indicates that the balance is under loaded. Check to seeif the weighing pan is properly installed and seated on the top ofthe unit. Performing the calibration procedure may cure this prob-lem, otherwise, contact Acculab for repair.2) H This indicates that there may be an excessive weight appliedto the weighing pan. It is critical not to exceed the maximum loadcapacity by more than 150% or damage to the balance may occur.This may also be an indication that the unit needs to be calibrated.Performing the calibration procedure may cure this problem, other-wise, contact Acculab for repair.3) E R 56This code refers to an error generated due to a sensorproblem. The most common cause is from objects being droppedonto the weighing pan or from the balance itself being dropped.Contact Acculab for repair.4) E R 57This code occurs when the electronics are no longerwithin the factory set parameters. The most common cause is fromrough or improper handling of the balance. Contact Acculab forrepair.R