Acculab POCKET PRO PP-250B Instruction Manual
Model PP-250BInstructionManualPLEASEREA DCOMPLETEINSTRUCTIONS BEFOREUSEKEYPA DFUNCTIONSCA L / MO DE : Press and hold this key to begin calibration proce-dure as outlined under the CALIBRATION section. After unit is on orcalibrated, press and release the Cal/Mode key will change the weigh-ing mode. When balance is turned on the unit initially defaults to thegram (g) mode. The following modes may also be selected: ounces(oz), penny weight (dwt), troy ounces (ozt).O N/ M EM O RY: Press and release to turn on balance. Once the unitis on, the same key operates the additive memory feature. The follow-ing steps outline the procedure for cumulative weighing of samples.1) If needed, place container on weighing pan, wait for stable reading,then press and release "tare" to return balance to zero and permanent-ly remove container weight from the additive procedure.2) Add first sample until desired weight is achieved.3) Press and release "memory" to reset unit to zero. The memorysymbol (up arrow) appears in the upper left corner, indicating theprevious weight value has been stored.4) Add second sample until desired weight is achieved.5) Press and release "memory" again. The (up arrow) symbol willdisappear and the display will show the combined weight of the firstand second samples. Repeat steps 3 through 5 for additional items.NOTE: When the entire load is removed from the balance, the displaywill show a negative value equal to the tared value of the container ifused. To reset the balance to zero, press and release the tare key.TARE: Press and release tare to reset the balance to zero. Tarecan be used to eliminate the weight value of a container from a sampleor procedure. The container weight is permanently removed from theremainder of the procedure.NOTE: When all weight is removed from the weighing pan, the taredvalue of a container will be displayed as a negative number. Press andrelease tare again to return the balance to zero.O F F : Press and release to turn off balance. The off key is also usedto perform the calibration procedure as outlined under calibration.Calibration Weight: OIML Class M2Pocket ProR250B (1) 200g calibration weight9V Alkaline BatteryCarry PouchRRM o de l sCapacity (g) 250gReadability 0.1 g/0.01 oz/0.1 dwt/0.01oztRepeatability (g) ±0.1Weighing Modes g, oz, dwt, oztTare Range To capacity by subtractionCalibration External calibration from keypadStabilization Time (sec) 3Maximum Overload 150% of capacityOverload Indication "E" with audio toneUnderload Indication Negative valueAuto Off 4 minutes no activityOptimum Operating Temperature 64˚û - 77˚û F (18-25 C)Optimum Operating Humidity Less than 80% RHDisplay Type LCD/ with power up segment testAudio Tone Start up, function keys, overload, low batteryLow Battery Indication "LO" w/10 beep signalPower Requirements 9V alkaline battery onlyPlatform Size/Type 3" x 3.25" plastic (75 x 85mm)Dimensions HxWxD 1" x 3" x 4.75" (25 x 75 x 120mm)Net Weight (lb/kg) 1/0.5Included Accessories (1) 200g calibration weight9V alkaline battery & carry pouchOptional Accessories NonePerformance specifications measured within optimum temperature range after recom-mended warm up and proper calibration. Specifications subject to change without notice.S pe c i fi c a ti on sPh o n e : 800-656-4400631-254-4299Fax : 800-356-0338631-253-5472S a l e s O ff i ce : 131 Heartland Blvd.Edgewood, NY 11717www.acculab.com400287.1 Rev. BACCULABACCULABLimited WarrantyEffective Date: January 1, 2003Standard Terms and ConditionsModels: Pocket Pro series PP-250BACCULAB warrants the product PP-250B against defects in material andworkmanship to the original consumer for a peroid of twelve (12) monthsor a maximum of fifteen (15) months from date of sale to authorizedACCULAB distributor. The warranty includes parts, labor and returnshipping charges to customer (ground freight).This specific warranty shall not apply to any product damaged due to accident,misuse, abuse, lightning strike, power surges, improper packaging for shipment toACCULAB, or service/modification by anyone other than an authorized ACCULABTechnician.The purchaser's sole remedy, ACCULAB and its suppliers sole liability are set forthherein. In no event shall ACCULAB or its suppliers be liable for any damages,incidental or consequential, expenses, lost profits, lost savings, or any other claimsdue to the use or inability to use the product/s. ACCULAB shall limit its obligationsunder warranty to a time not to exceed the original product warranty period setforth herein. This warranty gives you specific legal rights and you may have otherrights, which may be different from state to state.In the event that service is required, the Customer/Distributor should callACCULAB (800-656-4400, extension 8342) for proper return authorization. Theproduct must be delivered to ACCULAB, Service Division 6542 Fig Street, Arvada,CO., 80004 within the warranty period, freight charges prepaid. The customer isresponsible for product removal, installation and proper packing in order toprevent damage while shipping to ACCULAB Service facility.This limited warranty supersedes all other warranties pertaining to the ACCULABproducts, whether expressed or implied. Claims may be made by calling 800-656-4400/631-254-4299, by fax 800-356-0338/631-253-5472, or in writing to:Attn: Warranty Administrator6542 Fig StreetArvada, CO., 80004(800-656-4400)SUPPLIED ACCESSORIES:PP-250B |
Related manuals for Acculab POCKET PRO PP-250B
Acculab PP-62 Instruction Manual
Acculab PP-62 Instruction Manual
Acculab GSI-200 Instruction Manual
Acculab SVI-50C Instruction Manual
Acculab VI Series Instruction Manual
Acculab VICON Operating Instructions Manual
Acculab ATL-224 Operating Instructions Manual
Acculab ECL6 Operating Instructions Manual
Acculab ALC series Operating Instructions Manual
Acculab 98648-013-61 Operating Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine