RETRIEVING TEST RESULTS - 7VerifyNow System User Manual Page 64 14340.JFeature DescriptionO1: High optical signal levelO2: Low optical signal levelV1: Maximum vacuum levelV2: Maximum leak rateP1: Maximum pressure levelF1: Mixer frequency flag countF2: Mixer frequency transitions high-to-lowMask: Identifies failing component elementFlaggedParameterThe failed parameter(s) will be indicated by an arrow (←) to theright of the measured value(s). Refer to the Appendix for adescription of parameters.In addition to viewing earlier results, icons keys enable results to be printed(optional).Icon DescriptionPrint Result Scroll to the selected record, and select this icon to print theselected EQC results.Print AllResultsScroll backwards through the results using the ←←←← key, andselect this icon to print all EQC results in the log that areforward of the cursor position.Back Select this icon to return to the previous screen.7.2.2 Wet Quality Control Results LogThe cursor is positioned on the most recent assay result (Figure 7-5). Navigate upand down an individual list using the (←←←← , →→→→) keys.
