Accurex XDG Installation, Operation And Maintenance Manual
                                                                | |
Contents
| 
Document 482887Models XDG, XDGXDirect Gas Make-Up AirInstallation, Operation and Maintenance ManualPlease read and save these instructions for future reference. Read carefully before attempting to assemble, install,operate or maintain the product described. Protect yourself and others by observing all safety information. Failureto comply with instructions will result in voiding of the product warranty and may result in personal injury and/orproperty damage.Direct Gas Make-Up Air1General Safety InformationOnly qualified personnel should install this unit.Personnel should have a clear understanding of theseinstructions and should be aware of general safetyprecautions. Improper installation can result in electricshock, possible injury due to coming in contact withmoving parts, as well as other potential hazards. Otherconsiderations may be required if high winds or seismicactivity are present. If more information is needed,contact a licensed professional engineer before movingforward.1. Follow all local electrical and safety codes, as wellas the National Electrical Code (NEC), the NationalFire Protection Agency (NFPA), where applicable.Follow the Canadian Electrical Code (CEC) inCanada.2. The rotation of the supply fan wheel is critical. Itmust be free to rotate without striking or rubbingany stationary objects.3. Motor must be securely and adequately grounded.4. Do not spin fan wheel faster than the maximumcataloged fan rpm. Adjustments to fan speedsignificantly affects motor load. If the fan RPM ischanged, the motor current should be checked tomake sure it is not exceeding the motor nameplateamps.5. Do not allow the power cable to kink or come incontact with oil, grease, hot surfaces, or chemicals.Replace cord immediately if damaged.6. Verify that the power source is compatible with theequipment.7. Never open fan access doors while the fan isrunning.DANGERAlways disconnect power before workingon or near a unit. Use appropriate lockouttagout procedures to prevent accidentalpower up.CAUTIONWhen servicing the unit, motor may be hotenough to cause pain or injury. Allow motorto cool before servicing.FOR YOUR SAFETYIf you smell gas:1. Open windows.2. Do not touch electrical switches.3. Extinguish any open flame.4. Immediately call your gas supplier.FOR YOUR SAFETYThe use and storage of gasoline or otherflammable vapors and liquids in opencontainers in the vicinity of this appliance ishazardous.WARNINGImproper installation, adjustment, alteration,service or maintenance can causeproperty damage, injury or death. Read theinstallation, operating and maintenanceinstructions thoroughly before installing orservicing this equipment. |
manualsdatabase
Your AI-powered manual search engine