Accusplit A925MXTBL Operating Instructions Manual

Contents

operating instructions

Accusplit A925MXTBL Operating Instructions Manual Manual pdf 1 page image

ACCUSPLIT A925MXTBLWrist-Worn Stopwatch with Split MemoryOperating InstructionsCongratulations on your purchase of an A925MXTBL stopwatchfor the wrist! You’re about to enjoy the convenience of havingprofessional timing right at your fingertips when you need it,plus a regular wristwatch whenever you don’t.SETUPMost watches ship with a battery inter-rupt in place to save battery life. Turn thewatch over and use a quarter or nickleto twist open the battery compartmenthatch. Remove clear plastic strip fromunderneath the battery. Replace the bat-tery, taking care to ensure that the posi-tive (+) terminal is facing up. Replace thebattery compartment hatch and tightenwith the coin, making sure that the smallarrow points to the dot at the top of thewatch case when you are finished. Peelthe simulated display sticker off thewatch face.Your new watch has four modes of op-eration: 1/100th second Memory Stop-watch with Turbo features, Triple-modeTimer, plus two Time-of-Day/Date/Alarmmodes. When the battery is enabled,your watch will come to life in stopwatchmode. Press theLbutton to cycle be-tween the modes. Your watch also has anElectroluminescent backlight. Press theEL button to activate the backlight.STOPWATCH MODEThe watch features a professional timingcircuit with powerful stopwatch features.This is how the display looks when instopwatch mode.0:32:29.380:05:03. 1 1ACCUSPLIT∞S1/S4S2AOSLELS3M925MXTURBO4SPLITMaster ResetIts a good idea to reset the stopwatcheach time before use. Push S2 for2 seconds to Reset**Event TimingEvent timing is the simplest form of tim-ing. It is good when you want to mea-sure the total time from the start to thefinish of a particular event.S2 – StartS2 – Stop (Display shows “SPLIT”)S2 (2sec) – Reset**Dual Split Memory with SplitCounterWhen timing an activity with pausesor repeated events, you will need touse split timing with memories.S2 – Start (Shows Running DUAL Time)S2 – Split* (Top shows CUM 1, Bottomshows LAP 1)S2 – Split* (shows CUM 2, Bottom showsLAP 2)S2 – Split* (Top shows CUM 3, Bottomshows LAP 3)S2 – Split* (Top shows CUM 4, Bottomshows LAP 4)S2 (2sec) – Reset***Split Counter always shows Current SplitNote: You can always press S1/S4 to returnto Running Time.Memory Review (before Resetting)M – Review* (Bottom shows AVE LAPSplit, Top shows TOTAL ELAPSED TIME)M – Review (Shows last DUAL Split)M – Review (Shows next DUAL Split, inreverse order)*Reviews at any time in reverse numericalorder. Hold down for Rapid Review.STOPWATCH AND SPEED/RATEThe advanced “Turbo” functions onthe watch calculate speed or rate oncedistance has been input into the watch(recall that Rate = Units/Time).Speed/Rate Function SettingS1(2sec) - Enter Turbo (Speed/Rate) SetFunctionS1(4sec) – Enter set function and ResetTurbo fields to zero (as for DUALSPLIT timing)S2 – Select field to be Set (field willflash)S3 – Set field to Desired SettingS4 – Exit Setting FunctionWhen a Distance or Sample Count Is setIn Turbo Set Up mode, “SPD ” (Speed)indicator will be illuminated at bottom ofdisplay. The number you enter shouldcorrespond to the Distance or SampleCount you want to use for the Speedor Rate Computation. “P-HR” in displaymeans watch is set to compute “perHour” rate, and “P-Mn” means watch isset to compute a “per Minute” rate.If you want the watch to compute in “perSec” rate, divide the Distance or SampleCount (Strokes, Strides, Units, etc.) by60, then enter it.For example, let’s say that you are at arace track with a course that is one milelong. If you set the Distance to 1.00 andthe rate to “P-HR,” and then time severallaps, the Average Speed recorded by thewatch will be in miles per hour.Speed/Rate Function OperationS2 – Start (Shows Running LAP Time)S2 – Split* (Top and Bottom showSPEED/RATE 1/LAP 1)S2 – Split* (Top and Bottom showSPEED/RATE 2/LAP 2)S2 – Split* (Top and Bottom showSPEED/RATE 3/LAP 3)S2 (2sec) – Reset LAP and SPEED/RATEto zero***For only chance to view Total AverageSpeed/Rate, push M.Memory Review (before Resetting)M – Review* (Bottom shows AVETOTAL SPEED/RATE, Top shows TOTALELAPSED TIME)M – Review* (Bottom shows AVE LAPSplit, Top shows TOTAL ELAPSED TIME)M – Review (Shows last SPEED/RATEand LAP Split)M – Review (Shows next SPEED/RATEand LAP Split, in reverse order)*Reviews at any time in reverse numericalorder. Hold down for Rapid Review.**Reset before 30 hrs. (end of range) androllover.ACCUSPLIT, Inc. • 6120 Stoneridge Mall Rd., Suite 210 • Pleasanton, CA 94588 USA800-965-2008 • 925-226-0888 • FAX 925-463-0147 • www.ACCUSPLIT.com • support@ACCUSPLIT.com0:32:29.380:05:03. 1 1ACCUSPLIT∞S1/S4S2AOSLELS3M925MXTURBO4SPLITS1/S4LS2S3 & MEL BacklightButtonSplit CounterSplit Time Lap TimeTurboSet upDisplay

/ 2

Related manuals for Accusplit A925MXTBL