3. InstallationUser Guide Page 3-9 Java-based application environment3.3.3 Before You StartBefore RAIDGuard X can be installed on Windows, Mac, and Linux platforms, make sure youhave completed the following: Install hard disk drives into the chassis. Please refer to Section 3.1.1, “Installing DiskDrives”. Install the RAID host bus adapter card to your host server. Please refer to Section 3.1.2,“Installing HBA Card”. Connect the QSFP cable between the A08S3-PS and the host server. Please refer toSection 3.1.3, “Connecting the HBA to the A08S3-PS System”. Power on the A08S3-PS and the host server in the correct sequence. Please refer toSection 3.2.1, “Powering On”.3.3.4 Installing the driver and RAIDGuard XThe RAIDGuard X GUI can be downloaded from the Accusys website. Go to the websitesupport page (http://www.accusys.com.tw/support/download_new.htm) for available downloads.If you need more info or tech support, please contact your system integrator of ExaSAN productor Accusys FAE Dept. (see Appendix C “Customer Service and Technical Support” for moreinformation)3.3.4.1 Installing RAIDGuard X on MAC and WindowsRAIDGuard X Installation1. Insert the CD-ROM into the CD-ROM drive of the MAC or PC.2. For Macs, execute “CD-ROM/MAC Installation/Vx.x/6xxxx_IP_MAC_x_x_x.mpkg".For PCs, execute “CD-ROM/Windows installation/GUI/x.x/6xxx_IP_Win_x.x.exe”.NoteIf you cannot find the installation DVD or you want to install the latestversion of software, please go to Accusys official web site.(http://www.accusys.com.tw/support/download_new.htm)
