ACCUSYS, INC.5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDEPROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASEREV. G–05-NOV-2007 PAGE 23 OF 273.3.5.6Command Name Command DescriptionCancelSplitSchedule Use this command to cancel split schedule for the specified mirrorsnapshot.Parameter 1 Parameter DescriptionShot No.:<1~8>Shot No.:Specify an existing mirror snapshot to cancel schedule.3.3.6 Miscellaneous Commands3.3.6.1Command Name Command DescriptionDiskLagProof Use this command to enable or disable Disk Lag Proof mode. Thismode is only effective on RAID Level 5.Parameter 1 Parameter Description Enable / Disable Disk Lag Proof mode.3.3.6.2Command Name Command DescriptionNCQMode Use this command to enable or disable NCQ(native command queue)mode.Parameter 1 Parameter Description Enable / Disable NCQ mode.3.3.6.3Command Name Command DescriptionSMARTMode Use this command to enable or disable SMART pre-failure warningmode.Parameter 1 Parameter Description Enable / Disable SMART pre-failure warning mode.