OperationsIf the mobile isn’t able to pair the headset within 90 seconds after enteringDiscovery Mode, the process will terminate automatically. User mustrepeat the entire pairing process again by turning the headset OFF, andthen re-entering the Discovery Mode.Multipoint Pairing(Connecting your headset to 2 mobile phones)BT703 has the ability to pair with more than one device at the same time.1. Follow the instruction on the previous page on pairing with the firstmobile phone.2. After the successful pairing with the first mobile phone.3. Turn the headset off.4. Repeat the same pairing procedure with a second mobile phone.5. Go back to the first mobile phone, and select BTK703 to activate theconnection.Now, both mobile phones are connected to the same Bluetooth headset.When a call comes in from any of the two mobile phones, click the AnswerButton on the headset to connect the call.While you are on the call with one phone, the other phone’s BluetoothHeadset connection will be disconnected temporarily. So if another callcomes in at the same time, you can only connect to the first call.OperationsE Wearing the HeadsetD Pairing the HeadsetFirst, connect the headset to the Earhook as illustrated above.Depending on which ear you prefer to wear the headset, you can flipthe Earhook over before you connect it to the headset.Wear the headset by inserting the Earbud into your ear, and extend theEarhook to the back of your ear for a firm fit. If the size or the curve of theEarhook is not a perfect fit, gently bend the Earhook to adjust. Do notuse extreme force as this can break the Earhook.EarhookEarbudF Making a CallIf your BT703 is properly connected to your mobile phone, make aphone call simply by dialing the number using your phone and clicksend or call. The BT703 will automatically connect the audio channel.User should be able to ear the dial-tone of the phone once the call isbeing made.