Accvent LLC QM-QM-G2GFQ1BL Manual
                               | |
Contents
| 
12Number keys In the dial interface, press and hold the # key to activate/deactivate the silent profile. In dialing interface, press and hold * key to input “+”, “P” or “W”; “P” and “W” are used to call extension and “+” is used tocall international numbers.Tip: The difference between W and P: if P is pressed, it pauses for three seconds and then sends DTMF; if W is pressed, awindow pops up and asks if “Send DTMF?”Language and input methodThe mobile phone provides English, French, Spanish and Portuguese input methods. Please refer to the chapter ofediting English, French, Spanish and Portuguese for specific operation. You can understand the operation and switch of inputmethods.ServiceSTK service is the SIM card toolbox. This mobile phone supports service function and the menus depend on SIM card andthe network. If the network provides services and the SIM card supports, the service menu will be added to the mobile phoneautomatically.GroupThe groups are Friends, Family, VIP, Colleague and Others. You can customize the ringtone and caller picture for eachgroup.NounMaking a DDD To make a call with SIM1, the “SIM1” characters appear in front of the number; to make a call with SIM2, the “SIM2”characters appear in front of the number. Once the other party answers, the screen displays the call status. Press the End key to end the call. To make a DDD: Area code + Telephone number + Dial keyMaking an IDD If you need to make an international call, press and hold the * key until the prefix symbol “+” of international long distancecall appears on the screen , and you can make a call in any country when you don’t know the local prefix number ofinternational call (for example, +86 in China). Enter the prefix number, and then enter the country code and full phone number. The country codes are according to theinternational tradition, and Germany is 49, UK 44, Sweden 46, etc. To make an IDD: “+” Country code + Complete telephone number + Call keyCalling extension Some extensions of fixed telephone can’t be dialed through directly and you need to dial through the exchange before dialingthe extension. If you insert the pause symbol P between the exchange number and the extension number when you input thephone number, the mobile phone will complete the dialing and dial extension automatically. To enter “P”: press and hold thestylus, or press * for three times (the symbol “P” appears on the screen). To call extension of fixed telephone (excluding +):Telephone number + P + Extension number + Call keyEmergency callYou can always make emergency call when you are in the coverage area of the network (you can know by checking theindicating stripe of network signal intensity on the upper left corner of the screen). If your network operator doesn’t provideroaming service in your area, the characters of “EMERGENCY CALLS ONLY” will appear on the screen and you could onlymake emergency call. If you are located in a service area of the network, emergency calls can also be made without a SIM card.* Note: In certain areas, 112 (emergency call) is provided by the network operator; if it is abnormal, please contact the networkoperator.IMEIInternational Mobile Equipment Identity. Turn off the mobile phone and take out the battery, and you can find the labelprinted with this bar code in the rear side. This number is also saved in the mobile phone. When the phone is turned on, enter“*#06#” to display the number.IP callSet the valid IP access number in “Settings/Call settings” first. Enter Contacts and select “IP call”.Note: Please consult local network operator that whether IP call should be enabled to call local numbers. |
manualsdatabase
Your AI-powered manual search engine