Ace K9 HA-2520 Installation Manual
              | |
2This manual is used in conjunction with the vehicle specificinstructions sheet.If the make, model and year do not match the vehicle instructions or the equipmentis being reinstalled in new vehicle Contact AceK9.Com Service Department.When contacting AceK9 service, have your SERIAL NUMBER available.________________________________________________________________________________________Safety Warnings and Installation InformationLife Safety EquipmentIt is vital that all Safety Features are installed, tested and working properly at thetime of installation.While installing, special attention needs to be made to power and safety warnings.This Life Safety Equipment must be installed to Emergency Vehicle Up-fittingStandards! Refer to the vehicles service manual and modifiers guides during installation.The window drop module is designed for vehicles with a rear seat K9 Transporterand window guards, to contain the K9 and prevent unauthorized access to the vehicle. Ifdropping un-guarded windows anti-theft system, equipment vault, and K9 transporter arerecommended.________________________________________________________________________________________Warning: Install Electronics modules in dry locations(Except Weather resistant, Sealed Window Relay Modules designed for in door installation)NEVER install in the following locations, which are frequently subject to wet conditions' On the floor boards. Under the floor mats. Under K9 transporter. In engine compartment. Against the air conditionerhousing/vents. Under seats. Under equipment consoles cup holders.Connections exposed to moisture should be protected.________________________________________________________________________________________Safety WarningsDo not install equipment in areas that interfere with vehicles safety systems (airbags, seatbelts). Use caution when drilling or installing screws, avoid wiring, fuel lines, or otherequipment that might be behind the surface.Never run wires through a drilled hole without a grommet, wires chaffing against metal willovertime cause malfunctions or vehicle fire. When using a grommet seal to prevent waterentry into vehicle. (use a sealant appropriately related for the location) |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine