Aceex 11n Wireless Router User Manual
                                                            | |
Contents
| 
183.3.6 Packet Filter SettingWAN – Packet FilterUse IP Filters to deny particular WAN IP addresses from the Internet. You can deny special port number or allports for a specific IP address. You will only need to input the WAN IP address(es) of the computer(s) that will bedenied.Enable: Enable/Disable the WAN packet filter, default setting is Disable.Source IP: The IP address of the WAN computer that will be denied access to the Internet. You can also add arange of IP addresses.Destination Port: The single port or port range that will be denied to access. If no port is specified, all ports willbe denied access.Protocol: This is the protocol type that will be used with the Port that will be blocked.Block: You can block the IP address of the WAN computer always or by schedule.Day: If Block set to “by schedule”, you need to determine which day(s) will be performed.Time: If Block set to “by schedule”, you need to determine which time will be performed.Action: Add a new WAN packet filter or update a specified WAN packet filter.LAN – Packet FilterUse IP Filters to deny particular LAN IP addresses from accessing the Internet. You can deny special port numberor all ports for a specific IP address. You will only need to input the LAN IP address(es) of the computer(s) that will |
Related manuals for Aceex 11n Wireless Router
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine