Acer 1510 Series User Manual

Contents

Acer 1510 Series User Manual Manual pdf 41 page image

31English EnglishTo remove a battery pack:1 Slide the battery release latch to release the battery.2 Pull the battery from the battery bay.Charging the batteryTo charge the battery, first make sure that it is correctly installed in thebattery bay. Plug the AC adapter into the computer, and connect to amains power outlet. You can continue to operate your computer on ACpower while your battery is charging. However, charging the batterywith the computer turned off results in a significantly faster chargetime.Note: You are advised to charge the battery before retiring for theday. Allowing the battery to charge overnight before travelingenables you to start the next day with a fully charged battery.Checking the battery levelThe Windows Power Meter indicates the current battery level. Rest thecursor over the battery/power icon on the taskbar to see the battery'spresent charge level.Optimizing battery lifeOptimizing battery life helps you get the most out of batteryoperation, prolonging the charge/recharge cycle and improvingrecharging efficiency. You are advised to follow the suggestions set outbelow:• Purchase an extra battery pack.• Use AC power whenever possible, reserving your battery for on-the-go use.• Eject a PC card if it is not being used, as it will continue to drawpower.• Store the battery pack in a cool, dry place. The recommendedtemperature is 10°C to 30°C. Higher temperatures cause thebattery to self-discharge faster.• Excessive recharging decreases the battery life.• Look after your AC adapter and battery.