41L1500-786-1A 英文 8FRONT PANEL CONTROL• /Power Key:Press this knob to switch ON/OFF of monitor’s power.• /MENU/ENTER :Activate OSD menu when OSD is OFF or activate/de-activate adjustmentfunction when OSD is ON or Exit OSD menu when in Volume Adjust OSDstatus.• Volume:Activates the volume control when the OSD is OFF or navigate throughadjustment icons when OSD is ON or adjust a function when function isactivated.• >/Volume:Activates the volume control when the OSD is OFF or navigate throughadjustment icons when OSD is ON or adjust a function when function isactivated.• /Auto Adjust Key/Exit:1. When OSD menu is in active status, this button will act as EXIT-KEY(EXIT OSD menu)2. When OSD menu is in off status, press this button over 2 seconds toactivate the Auto Adjustment function.The Auto Adjustment function is used to set the HPos, VPos, Clockand Focus.• Power Indicator:Blue — Power On mode.Orange — Power SavingLight Blue — Power Off mode.NOTES• Do not install the monitor in a location near heat sources such as radiatorsor air ducts, or in a place subject to direct sunlight, or excessive dust ormechanical vibration or shock.• Save the original shipping box and packing materials, as they will come inhandy if you ever have to ship your monitor.• For maximum protection, repackage your monitor as it was originallypacked at the factory.• To keep the monitor looking new, periodically clean it with a soft cloth.Stubborn stains may be removed with a cloth lightly dampened with a milddetergent solution. Never use strong solvents such as thinner, benzene, orabrasive cleaners, since these will damage the cabinet. As a safetyprecaution, always unplug the monitor before cleaning it.