Acer 5540 Series Service Manual

Also see for Aspire 5540: User guide User guide Service guide

Contents

Acer 5540 Series Service Manual Manual pdf 35 page image

Chapter 1 29Hardware Specifications and ConfigurationsNOTE: If you need to check PXE version, press F2 to enter BIOS then enable boot from LAN function. Afterthat, power off the system and remove the HDD. Last, reboot the laptop. Then you will see PXE versiondisplaying on the screen.ProcessorItem SpecificationCPU type Intel ® Core TM Duo processor T2300/T2400/T2500/T2600 (2 MB L2 cache,1.66/1.83/2/2.16 GHz, 667 MHz FSB) or higherCore logic Intel ® 945GM/945PM Express chipset+ICH7CPU package Intel socketable 478pin Micro-BGACPU core voltage 0.944~1.3VBIOSItem SpecificationBIOS vendor PhneoixBIOS Version V1.03BIOS ROM type Flash ROMBIOS ROM size 512KBBIOS package 32-pin PLCCSupported protocols ACPI 1.0b, PC Card 95, SM BIOS 2.3, IEEE1284-ECP/EPP, PCI 2.2, WFM2.0, PnP 1.0a, DMI 2.0, PS/2 keyboard and mouse, USB 2.0, VGA BIOS,CD-ROM bootable, IEEE 1394, PXEBIOS password control Set by setup manualSecond Level CacheItem SpecificationCache controller Built-in CPUCache size 2MB1st level cache control Always enabled2st level cache control Always enabledCache scheme control Fixed in write-backSystem MemoryItem SpecificationMemory controller Built-in Intel ® 945GM/PMMemory size 0MB (no on-board memory)DIMM socket number 2 socketsSupports memory size per socket 1024MBSupports maximum memory size 2G (by two 1024MB SO-DIMM module)Supports DIMM type DDR 2 Synchronous DRAMSupports DIMM Speed 533 MHzSupports DIMM voltage 1.8V and 0.9VSupports DIMM package 200-pin soDIMMMemory module combinations You can install memory modules in any combinations as long as theymatch the above specifications.