AcerPower 6000 User’s Guide3-83.4 Disk DrivesSelect Disk Drives from the main menu to configure the drives installed in yoursystem.The following screen shows the Disk Drives menu:Disk Drives Page 1/1Floppy Drive A ........... [xx-MB xx-inch]Floppy Drive B ........... [xx-MB xx-inch]LS-120 drive as ........... [ Normal ]• IDE Primary Channel Master• IDE Primary Channel Slave• IDE Secondary Channel Master• IDE Secondary Channel Slave↑↓ = Move Highlight Bar F1 = HelpEsc = Exit → ← = Change Setting,3.4.1 Floppy DrivesTo enter the configuration value for the first floppy drive (drive A), highlight theFloppy Drive A parameter. Press or to view the options and select theappropriate value.Possible settings for the Floppy Drive parameters are:• [ None ]• [360 KB, 5.25-inch]• [1.2 MB, 5.25-inch]
