Appendix111Startup Error MessagesIf you receive an error message during system startup, notethe message and take corrective action. The following tablelists the error messages in alphabetical order together withthe recommended course of action.Error Message Corrective ActionDisk Boot Failure Insert a system disk in drive A,then press Enter.Diskette Drive TypeMismatchPress Fn+F2 to reconfigure thecomputer with the BIOS setuputility.Equipment ConfigurationErrorPress Fn+F2 to reconfigure thecomputer with the BIOS setuputility.Insert system diskette andpress key to rebootInsert a system disk in drive A,then press Enter.Memory Size Mismatch Press Fn+F2 and select theSystem Configuration menu. Thenpress Esc to exit the BIOS setuputility, saving the current settings.Missing Operating System Correct the hard drive type andreboot. See the specification labelpasted on the back side of thecomputer or attached to hard diskdrive. We suggest you set the harddrive type to Auto.Non-system disk or diskerror. Replace and strikeany key when readyInsert a system disk in drive A,then press Enter.
