36. Turning the frame onTransferring image files to/from your PCUsing the control buttonsOperate this unit by pressing the control buttons on the back. Thescreen also shows the function icons for each button at thecorresponding position. For details, refer to the table on page 4.Sliding the power switch to ONturns the frame on, while slidingthe power switch to OFF turns theframe off.You can use a USB cable totransfer image files between yourPC and the memory card in theframe.1. Plug the small end of a USB cableto the USB port on the back of theunit.2. Plug the larger end of the USBcable to a USB port on your PC.3. Please wait while your PCrecognizes the external device.Some PCs may not recognize theexternal device on the first try. Ifthe external device is not foundafter a few minutes, pleasereconnect the USB cable.4. Double-click the new drive letterthat appears under My Computerto access the inserted memorycard. Then, you can start to copyimage files from your PC to theinserted memory card or vice versa.acer_AF207_en_QSG.fm Page 3 Tuesday, March 3, 2009 11:19 AM