Acer AL1531 User Manual

Contents

Acer AL1531 User Manual Manual pdf 4 page image

4Setting Up the LCD Monitor1.Make sure the AC power cord is connected to the LCD Monitor.2.Turn on the LCD Monitor's power switch, located on the bezel of the monitor.Power Management SystemThis LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMSprovides four power saving modes through detecting a horizontal or vertical sync. signal.When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator willlight yellow.Chapter 2 Display ControlsUser ControlsA brief description and the location of all LCD Monitor function controls and indicators:Figure 2-11 Stereo Speakers PC Audio Stereo output.2 Soft Power Switch(DC Power-On Indicator)1. Press the soft power switch to switch the monitor ON/OFF.2. LED lights Blue color --- Power is ON.3. LED lights Yellow --- Monitor is in "Power Saving Mode".4. LED is off --- Power is OFF.3 Auto1. Press the Auto Buttons Monitor will Auto-Adjusting.2. Press the Auto Buttons over 2 second the Monitor Searchinganother source. (Switch digital or Analog input)4 Function Select andAdjustment ControlButtons1. Direct press either left or right control button can adjustingspeaker Volume control.2. When press after Menu buttons then Press either left or rightcontrol button for OSD first menu (left side) function selection.3. When selection you want adjusting function then press Menubuttons again for OSD second menu (right side) functionselection. You can Press the left button to decrease the OSDsetting and press the right button to increase the OSD setting.5 Menu1. Press the Menu will show OSD (On Screen Display) FunctionMenus table.2. When OSD (On Screen Display) Menus display press MenuButtons will enable selection function.