Acer AL1716 Quick Start Manual

Also see for AL1716: Specifications User guide User manual Service guide Service manual

Acer AL1716 Quick Start Manual Manual pdf 1 page image

Acer LCD monitor Quick Start Guide (QSG)Important Safety InstructionsPlease read the following instructions carefully. This manual should be retained for future use.1. To clean LCD Monitor screen;-- Power off LCD Monitor and unplug the AC Cord.-- Spray a non-solvent cleaning solution onto a rag and clean the screen gently.2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight canseverely damage it.3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should beperformed by an authorized technician.5. Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F).Storing the LCD Monitor outside this range could result in permanent damage.6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.* Monitor to PC signal cable is frayed or damaged.* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.* LCD Monitor or the case is damaged.Package contentsLCD Monitor Power Cord VGA Cable DVI-D Cable(Optional)User manual(CD)Quick start guideAssembly Your Monitor with Monitor Base• Take out the monitor base from monitor box and placeon a stable and level workspace• Take out your monitor and assembly with the base.Make sure you heard click soundConnecting Your Monitor to a ComputerPull out the pin from the display support frame as per the figure and then adjust the height. Note that upon pulling out the pin, erectthe machine on the table to prevent the top part of the display from ejecting.(Only h / r model)• Turn off your computer and unplug your computer's power cable.• Connect the signal cable to the VGA input socket of of the monitor andconnect the signal cable to the VGA output socket of the graphics cardon the computer. Then tighten the thumbscrews on the connector.• Optional: the signal cable to the DVI-D input socket of of the monitor andconnect the signal cable to the DVI-D output socket of the graphics cardon the computer. Then tighten the thumbscrews on the connector.• Insert the monitor power cable into the power port on the back of themonitor.• Plug the power cables of your computer and your monitor into a nearbyelectrical outlet.• Turn on your computer and monitor.Operating Your Monitor1 Auto AutoconfigurationIf OSD is active, press to exit. If OSD is inactive, press and themonitor will automatically optimize the display position, clock andphase of your display.2 < Minus If OSD is active, press to select or adjust OSD options.3 > Plus If OSD is active, press to select or adjust OSD options.4 Menu OSD manual Press to view OSD.Press again to enter a selection in OSD.5 powerPower on/offGreen: power onOrange: in sleep modeEnglish

/ 1

Related manuals for Acer AL1716