Acer LCD Monitor Quick Start Guide (QSG)Important Safety InstructionsPlease read the following instructions carefully.This manual should be retained for future use.1. To clean LCD Monitor screen;-- Power off LCD Monitor and unplug the AC Cord.-- Spray a non-solvent cleaning solution onto a rag andclean the screen gently.2. Do not place the LCD Monitor near a window.Exposing the monitor to rain water,moisture or sunlight can severely damage it.3. Do not apply pressure to the LCD screen.Excess pressure may cause permanent damageto the display.4. Do not remove the cover or attempt to service this unitby yourself. Servicing of any nature should be performedby an authorized technician.5. Operate LCD Monitor in a room with a room temperatureof 5°C~ 40°C (or 41°F ~ 104°F). Operating LCD Monitoroutside this range could result in permanent damage.6. If any of the following occurs, immediately unplug yourmonitor and call an authorized technician.* Monitor to PC signal cable is frayed or damaged.* Liquid spilled into LCD Monitor or the monitor has beenexposed to rain.* LCD Monitor or the case is damaged.Connecting Your Monitor to a ComputerTurn off your computer and unplug yourcomputer's power cable.Connect the VGA cable's connectors to themonitor's signal connector and videoconnector on the back of your computer.Option: Connect the DVI cable's connectors tothe monitor's signal connector and videoconnector on the back of your computer.Insert the monitor power cable into the powerport on the back of the monitor.Turn on your computer and monitor.Plug the power cables of your computer andyour monitor into a nearby electrical outlet.Operating Your MonitorIf OSD is active, press to exit. If OSD isinactive,press and themonitor will automaticallyoptimize the display position,clock and phase of your display.Auto Configuration12345AUTOMENU>< If OSD is active, press to select oradjust OSD options.If OSD is active, press to select oradjust OSD options.Press to view OSD. Press AUTO to exit.Power on/offGreen: power onOrange: in sleep mode(CD)LCD MonitorPower Cord(CD)User ManualQuick Start GuideDVI Cable (option)VGA CableMinusPlusOSD MenuPowerPackage ContentsEnglishAssembly Your Monitor with Monitor BaseTake out the monitor base from monitor box and placeon a stable and level workspace.Take out your monitor and assembly with the base.Make sure you heard click soundVGA CableDVI Cable (option)Power Cord