30Hot-Key Menua. Outlineb. The Description For Hot-Key FunctionItem Operation Icon DescriptionVolumeWhen the OSD is closed, pressLeft or Right button will beVolume Hot-Key FunctionVolume of Audio adjustment. TheAudio will be Mute when volume=0OSD Messagea. Outlineb. The Description For OSD MessageItem DescriptionAuto ConfigPlease Wait1.) When Analog signal input, if User Press Hot-Key “Auto”, will show thismessage, and the monitor do the auto config function.2.) When Digital signal input, without this OSD Message.Input NotSupportedWhen the Hsync Frequency, Vsync Frequency or Resolution is out of themonitor support range, will show this message. This message will be flying.Cable NotConnected1.) Analog-Only Model: When the video cable is not connected, will show thismessage. This message will be flying.2.) Dual-Input Model: Dual-Input Model without this OSD Message.No Signal1.) Analog-Only Model: When the video cable is connected, but there is noactive signal input, will show this message, then enter power saving.2.) Dual-Input Model: When the video cable is not connected, or the video cableis connected but there is no active signal input, will show this message, thenenter power saving.All manuals and user guides at all-guides.com