System Utilities 2-5Main TabThe Main tab allows the user to set the system time and date, enable or disable boot option, andenable or disable recovery.Figure 2-2. BIOS Main (Windows 10)Table 2-11. BIOS Main Tab Parameters (Windows 10)Item Name Example RemarkSystem Time HH:MM:SS • The format is the number of string.• The hours are displayed with 24 hour format.• The values set in the two fields take effectimmediately.System Date MM/DD/YYNetwork Boot [Enabled] / [Disabled]Default Network Boot value in different Boot Mode:• [UEFI] Boot Mode: [Disabled]• [Legacy] Boot Mode: [Enabled]F12 Boot Menu [Enabled] / [Disabled]• This function enables or disables the ability that usercan press F12 while POST to quickly select bootdevice.• The boot device change is only for one time change.In other words, the next time system reboots, the bootdevice sequence will be the same as the one definedin the BIOS Setup Utility -> Boot Menu.• The default value is [Disabled].Wake On LAN [Enabled] / [Disabled]• Wake on LAN feature allows someone to turn on anetwork computer remotely by sending Magic Packeteven if system is in off state.• The default value is [Disabled].• Panel off when wake on LAN.InsydeH20 Setup Utility Rev. 5 .0F1 Help Select Item F5/F6 Change Values F9 Setup DefaultsEsc Exit Select Menu Enter Select►Sub-Menu F10 Save and ExitSystem Time : [19:10:49]System Date : [01/01/2017]Network Boot: [Disabled]F12 Boot Menu: [Disabled]Wake on LAN: [Disabled]Touchpad: [Advanced]Lid Open Resume: [Enabled]Wake on USB while lid closed [Disabled]D2D Recovery: [Enabled]GPT Partition Recovery: [None]Clear GPT Partition [None]GPT Partition Record: No RecordInformation Main Advanced Security Boot ExitItem Specific HelpHour valid range is from 0 to 23.Minute Valid range is from 0to 59. Second Valid range is from 0 to59. REDUCE/INCREASE : F5/F6.
