Machine Maintenance Procedures 3-17WLAN (Wireless Local Area Network) Module Removal 0Prerequisite:Base Cover Removal1. Find the WLAN module (B). Refer to Figure 3-9.2. Disconnect main (A) and auxiliary (B) antenna cables from module (Figure 3-13).Figure 3-13. WLAN Module3. Remove one (1) screw (C) from the mainboard. Refer to Figure 3-13.4. Remove the WLAN module from the mainboard connector (D). Refer to Figure 3-13.WLAN Module Installation 01. Place the WLAN module into the mainboard connector (D). Refer to Figure 3-13.2. Install and secure one (1) screw (C) to mainboard. Refer to Figure 3-13.3. Install the main (A) and auxiliary (B) antenna cables on WLAN module. Refer toFigure 3-13.4. Install the base cover.ID Size Quantity Screw TypeC M2.0*3.0 NI 1CABD
