12 Chapter 2Advanced BIOS FeaturesParameter Description OptionReset Configuration Data Allows you to manually force BIOS to clear the previously saved ExtendedSystem Configuration Data (ESCD) data and reconfigure the settings.When set to no, it lets the BIOS configure all the devices in the system.When set to yes, it lets the OS configure Plug and Play (PnP) devices notrequired for boot if the system has a PnP OS.NoYesQuick Boot Allows you to decrease the time it takes to boot the computer by shorteningor skipping certain standard booting process.EnabledDisabledQuiet Boot When enabled, the BIOS splash screen displays during startup.When disabled, the diagnostic screen displays during startup.EnabledDisabled1st/2nd/3rd/4th Boot Device Specifies the boot order from the available devices. Hard DiskCD^DVDRemovableDeviceLANHard Disk Drive Priority Press Enter to access the Hard Disk Drive Priority submenu and specify the boot devicepriority sequence from available hard drives.Optical Disk Drive Priority Press Enter to access the Optical Disk Drive Priority submenu and specify the boot devicepriority sequence from available CD/DVD drives.Removable Device Priority Press Enter to access the Removable Device Priority submenu and specify the boot devicepriority sequence from available removable drives.Bootup Num-Lock Selects power on state for Num Lock. OnOffBoot Sector Virus Protection Enables or disables the boot sector virus protection feature. If enabled,BIOS will show a warning message on the screen or an alarm beep whensomeone attempts to write data into this area.DisabledEnabledHard Disk Write Protect Enables or disables the hard disk write protect feature. DisabledEnabledUSB Beep Message Enables or disables BIOS to display error beeps or messages during USBdevice enumeration.DisabledEnabled