85ME Subsystem ConfigurationSystem Acoustic & Performance ConfigurationParameter Description OptionsME-HECISupportSelect Enabled to enable ME-HECI (HostEmbedded Controller Interface) support,which will allow the Host OS tocommunicate directly with theManagement Engine (ME) in a standardmethod for system management,effectively replacing the SMbus.EnabledDisabledParameter Description OptionsThrottling -Closed LoopThrottling improves reliability andreduces power consumption in theprocessor by automatic voltage controlduring processor idle states.EnabledDisabledHysteresisTemperature(Availablewhen ClosedLoop isenabled.)Temperature Hysteresis is thetemperature lag (in degrees Celsius)after the predefi ned DIMMtemperature threshold is reached beforeClosed Loop Throttling begins.Disabled1.5 o C3.0 o C6.0 o CGuardbandTemperature(Availablewhen ClosedLoop isenabled.)This is the temperature that applies to the DIMMtemperature threshold. Each step is in 0.5 o C increments.The default is [006]. Press <+> or <-> on your keyboard tochange this value.InletTemperatureThis is the temperature detected at the chassis inlet. Eachstep is in 0.5 o C increments. The default is [070].TemperatureRiseThis is the temperature rise to the DIMM thermal zone.Each step is in 0.5 o C increments. The default is [020].Air Flow This is the air fl ow speed to the DIMM modules. Each stepis one mm/sec. The default is [1500].
