Acer AT1916D User Manual
                                  | |
Contents
| 
6PREPARATIONIMPORTANT: Do not apply pressure to thescreen display area which may compromisethe integrity of the display. The manufacturer’swarranty does not cover user abuse orimproper installations.ATTACHING THE BASEIMPORTANT: The Base of the TV must beassembled prior to usage.1. Place TV unit face down on a soft andflat surface (blanket, foam, cloth, etc.) toprevent any damage to the TV.2. Carefully align and insert the Base tothe stand.3. Gently push the Base towards the TVuntil the locking mechanism locks intoplace.PREPARING YOUR LCD TV FORWALL MOUNTINGWe suggest that you keep your TV at least 2.36inches (60 mm) from the wall to prevent cableinterference.Before mounting your TV on the wall, you needto remove the base.For your safety, please use listed wall mountbracket with minimum weight of the TVwithout stand. (Please see page.26)To attach a wall mount bracket to your TV:1 Loosen the screws holding your TV tothe stand and remove the stand basefrom the TV.2 Secure the wall mount bracket to theback of your TV using four screws, asindicated in the illustration.100 mm M4 screwsM4 screws100 mmNOTE Wall mount bracket & screws are notincluded.Please make sure to connect the power plugto the wall outlet socket after connecting theTV to the power cord!1. Install the base stand; place the TVon a solid surface.Min1 mEnsure that the TV is placed in a positionto allow free flow of air. Do not cover theventilation openings on the back cover.To prevent unsafe situations, no nakedflame sources, such as lighted candles,should be placed on or in the vicinity.Avoid heat, direct sunlight and exposureto rain or water. The equipment shall notbe exposed to drips or splashes. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine