Acer AT2635B User Manual

Also see for AT2635B: Service guide

Acer AT2635B User Manual Manual pdf 3 page image

English3Important safety instructionsRead these instructions carefully. Please put them somewhere safe forfuture reference.1 Follow all warnings and instructions marked on the product.2 Unplug this product from the wall outlet before cleaning. Donot use liquid cleaners or aerosol cleaners. Use a damp cloth forcleaning.3 Do not use this product near water.4 Do not place this product on an unstable cart, stand or table. Theproduct may fall, sustaining serious damage.5 Slots and openings are provided for ventilation; to ensure reliableoperation of the product and to protect it from overheating,these openings must not be blocked or covered. The openingsshould never be blocked by placing the product on a bed, sofa,rug or other similar surface. This product should never be placednear or over a radiator or heat register or in a built-in installationunless proper ventilation is provided.6 This product should be operated from the type of powerindicated on the marking label. If you are not sure of the type ofpower available, consult your dealer or local power company.7 Do not allow anything to rest on the power cord. Do not locatethis product where the cord will be stepped on.8 If an extension cord is used with this product, make sure that thetotal ampere rating of the equipment plugged into the extensioncord does not exceed the extension cord ampere rating. Also,make sure that the total rating of all products plugged into thewall outlet does not exceed the fuse rating.9 Never push objects of any kind into this product through cabinetslots as they may touch dangerous voltage points or short-outparts, which could result in a fire or electric shock. Never spillliquid of any kind on the product.10 Do not attempt to service this product yourself, as opening orremoving covers may expose you to dangerous voltage points orother risks. Refer all servicing to qualified service personnel.11 Unplug this product from the wall outlet and refer servicing toqualified service personnel under the following conditions:a. When the power cord or plug is damaged or frayed.b. If liquid has been spilled into the product.c. If the product has been exposed to rain or water.d. If the product does not operate normally when the operatinginstructions are followed. Adjust only those controls that arecovered by the operating instructions.Improper adjustmentof other controls could result in damage; extensive work bya qualified technician might then be required to restore theproduct to normal condition.e. If the product has been dropped or the case has beendamaged.f. If the product exhibits a distinct change in performance,indicating a need for service.12 Use only the proper type of power supply cord set (provided inyour accessories box) for this unit. Always disconnect the powercord from the wall outlet before servicing or disassembling thisequipment.13. Do not overload an electrical AC outlet, power strip, orconvenience receptical. The overall system load must not exceed80% of the branch circuit rating. If power strips are used, the loadshould not exceed 80% of the power strip input rating.14 Some products are equipped with a three-wire electricalgrounding-type plug that has a third pin for grounding. This plugonly fits into a grounded electrical outlet. This is a safety feature.Make sure the AC outlet is properly grounded. Do not defeat thesafety purpose of the grounding-type plug by trying to insert itinto a non-grounded outlet. If you cannot insert the plug into theoutlet, contact your electrician to replace the obsolete outlet.Disposal instructionsDo not throw this electronic device into the rubbish bin / containerwhen discarding. To minimize pollution and ensure utmost protectionof the global environment, please recycle.For more information regarding WEEE, please refer tohttp://global.acer.com/about/environmental.htmDeclaration of ConformityName of Manufacturer: Acer Computer (Shanghai) LimitedAddress of Manufacturer: 3F, No. 168 xizang medium road, HuangpuDistrict, Shanghai, ChinaDeclares that product: LCD TV MonitorModel: AT4235B ; AT3235B ; AT2635BConforms to the EMC Directive 89/336/EEC as attested by conformitywith the following harmonized standards:EN 55013: 2001+A1: 2003: Sound and television broadcast receiversand associated equipment - Radio disturbance characteristics - Limitsand methods of measurementEN 55020: 2002+A1: 2003: Sound and television broadcast receiversand associated equipment - Immunity characteristics - Limits andmethods of measurementEN55022:1998/A1:2000; AS/NZS CISPR 22: 2002: Limits and methodsof measurement of Radio Interference characteristics of InformationTechnology Equipment.EN55024: 1998/A1: 2001; AS/NZS CISPR 24: 1997: Informationtechnology equipment-Immunity characteristics-Limits and methodsof measurement.Conforms to the Low Voltage Directive 73/23/EEC as attested byconformity with the following harmonized standard:EN60065: 1998: Audio, video and similar electronic apparatus-safetyrequirements.We, Acer Computer (Shanghai) Limited, hereby declare that theequipment bearing the trade name and model number specifiedabove was tested conforming to the applicable Rules under the mostaccurate measurement standards possible, and that all the necessarysteps have been taken and are in force to assure that productionunits of the same equipment will continue to comply with therequirements.June 15, 2007Easy Lai / DirectorAcer Computer (Shanghai) LimitedThe grounding pin is an important safety feature. It is possibleto receive an electric shock from a system that is not properlygroundedThe grounding pin is also providing good immunity ability againstunexpected noise that interferes performance of this product and isproduced by other nearby electrical devices.