Acer AT2758ML User Manual

Acer AT2758ML User Manual Manual pdf 31 page image

31Channel managementOpen the Channel Management menu asdescribed on page 27. This menu providesthe following settings:Auto scanAuto scan allows you to scan for new ordeleted channels. If you completed thesetup wizard the first time you turned onyour TV, all available channels are listed.To scan again, select the Auto Scan setting, and then your country from theCountry List. Use the directional keys to select Start tuning and press the OKkey.Wait until the scan has finished; this will take several minutes.Manual scanAnalog manual scanYou can manually add an analog channel by adjusting the settings here. Usethe up or down directional kays to select a setting to change, use the left orright directional keys to change the setting. You may set: the analog channelwhere the signal will be stored, the encoding system, which direction to searchthrough analog frequencies, fine tune to a specific frequency and if thischannel will be skipped in the channel list.Use the left or right directional keys to change the channel being scanned.Digital manual scanYou can manually add a digital channel by searching in specific UHF channels.Use the left or right directional keys to change the channel being scanned.Channel editYou can edit the detected channels, to change how they are displayed in thechannel list. Use the up or down directional keys to select a channel, you canperform different actions:• Edit.• Skip.• Reorder.• Decode (available for channels that require a decoder).• Analog channel fine tune.• Favourite list.• Clean channel list (remove all detected channels).Preferred audio languageIf you are viewing an analog channel that supports multiple sound signals (e.g.NICAM, Bilingual), you may set which signal is used.