Acer AT3220A User Manual

Contents

Acer AT3220A User Manual Manual pdf 7 page image

English7Connecting the power cord1 Connect the AC cord into the AC input on the back of theset.2 Connect the plug to the wall outlet as shown.Setting up the remote control1 Open the cover on the back of the remote unit.2 Insert two AAA batteries (supplied) to match the polarityindicated inside the battery compartment.Basic connectionsGetting started watching your TVYou can also adjust these settings using the frontcontrol panel. Please see "Front panel view" onpage 4 for details.Enjoying analog TVConnecting an antenna/cableConnect the antenna cable to the appropriate antennaterminal on the back of the TV set as shown below.AnalogIOSetup may vary due to local broadcast differences.1241131 Powera. Turn on the power switch beneath the screen.b. Press the power button, number keys or channel up / downbutton on the remote control.2 Setup WizardThe first time you switch on the TV, the Setup Wizard will guide youto complete the language selection and channel scanning.Press the OK key to begin the setup process.Step 1. Select the setup language you prefer.Step 2. Please select country.Step 3. Ensure that your co-axial cables are connectedcorrectly before proceeding.Step 4. Scan for analog channels.Step 5. Setup is now complete. You are ready to beginwatching TV.If you leave the setup process before it is complete,you will be given a choice of options:1. Resume setup2. Resume setup wizard at next startup3. Exit and do not remind meSelect an option and press OK to exit.3 Changing channelsa. Press 0 - 9 on the remote control to select a channel. Thechannel changes after 2 seconds. Press ENTER to selectthe channel immediately.b. Pressing the channel ( CH ) up / down button on theremote control will also change the channel.4 Adjusting the volumeAdjust the volume level using the ( VOL ) +/- button on theremote control.Acer.TV.US.indb 7 6/22/2006 11:25:03 AM