Acer Altos 21000 Series User Manual

Contents

Acer Altos 21000 Series User Manual Manual pdf 137 page image

Altos 21000 Series User’s GuidePCI IRQ SettingThis parameter allows for Auto or Manual configuration of PCI devices. If youuse plug-and-play (PnP) devices, set this parameter to Auto. The system thenautomatically assigns IRQs to PnP devices. If your PCI device is not PnP, you canmanually assign the interrupt for each device. Refer to your PCI card manual formore information. The default setting is Auto.When the PCI IRQ Setting is set to Auto, allthe IRQ setting fields become gray and non-configurable.PCI SlotsThese parameters allow you to specify the appropriate interrupt for each of thePCI devices. You can assign IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11,IRQ12, IRQ14, or IRQ15 to the slots.To avoid conflicts, make sure that theinterrupt you assign to the various PCI slotsis not used by another device.Press or to move between fields. Press or to select options.