Acer Altos 600 Series User Manual

Also see for Altos 600 Series: User guide

Contents

Acer Altos 600 Series User Manual Manual pdf 60 page image

Chapter 3 Upgrading Your System46Installing expansion cardsThere are two kinds of expansion slots available on this system board: PCI(Peripheral Component Interconnect) and AGP (Accelerated Graphics Port).To install expansion cards:1. Locate an empty expansion slot on the system board.2. Remove the metal bracket located opposite the empty expansion slot using aPhillips screwdriver.3. Insert an expansion card into the slot. Make sure that the card is properlyseated.4. Secure the card to the housing with a screw.When you turn on the system, BIOS automatically detects and assigns resources tothe new device.Note: BIOS detects and configures only PnP (Plug n Play) expansion cards.