AcerAltos 9100B Series User’s Guide3-63.2.8 IDE Primary Channel MasterThis parameter specifies the current configuration of the IDE device connected tothe master port of the primary IDE channel. For information on how to configureIDE devices, see section 3.4.2.3.2.9 IDE Primary Channel SlaveThis parameter specifies the current configuration of the IDE device connected tothe slave port of the primary IDE channel. For information on how to configureIDE devices, see section 3.4.2.3.2.10 Total MemoryThis parameter specifies the total system memory. The memory size isautomatically detected by BIOS during the POST (Power-On Self Test). If youinstall additional memory, the system automatically adjusts this parameter todisplay the new memory size.1st Bank/2nd Bank/3rd Bank/4th BankThis parameter indicates the type of DRAM installed in the DIMM sockets. TheNone setting indicates that there is no DRAM installed. For the location of theDIMM sockets, refer to Figure 2-1.3.2.11 Serial Port 1This parameter indicates the serial port 1 address and IRQ setting.
