55IDE ConfigurationParameter Description OptionsPrimary IDEMasterDevice detected as primaryIDE master.Manual configure IDEdevice parameters ifdevice could not beendetected by BIOS.Primary IDESlaveDevice detected as primaryIDE slave.Secondary IDEMasterDevice detected as secondaryIDE master.Secondary IDESlaveDevice detected as secondaryIDE slave.Third IDEMasterDevice detected as third IDEmaster.Third IDE Slave Device detected as third IDEslave.Hard DiskWrite ProtectDisable/Enable device writeprotection. This will beeffective only if device isaccessed through BIOS.DisabledEnabledBIOS SETUP UTILITYAdvancedIDE Configuration___________________________________________________Primary IDE Master [Hard Disk]Primary IDE Slave [Hard Disk]Secondary IDE Master [ATAPI CDROM]Secondary IDE Slave [ATAPI CDROM]Third IDE Master [Hard Disk]Third IDE Slave [Hard Disk]Hard Disk Write Protect [Disabled]IDE Channel 3 mode [Native] Select ScreenSelect Item+ - Change OptionF1 General HelpF10 Save and ExitESC ExitV02.03 ©Copyright 1985-2000, American Megatrends Inc.While entering setup,BIOS auto detects thepresence of IDEdevices. This displaysthe status of autodetection of IDEdevices.
