Appendix A: Server management tools152Initializing the RAID volume1 Press Esc to return to the Management menu.2 Select Initialize from the Management menu.All logical drives should be listed under Logical Drives.3 Press the space bar to select the drives for initialization.The selected drive will be shown in yellow.4 Press F10, then select YES to start the initialization process.5 Once initialization is complete, press any key to continue.6 Press Esc to return to the Management menu.7 Press Esc, then select YES to close the configuration utility.Press Ctrl+Alt+Del to reboot the system, then proceed to the OSinstallation.Assigning a Hot Spare Disk1 Select Objects from Management menu.2 Select Physical Drive from Objects. All of the HDDs will be listed.3 Select a drive marked as READY and press Enter.4 Select Make Hot Spare and press Enter.5 Select Yes then you will see the HDD is changed from READY toHOTSP.6 Press ESC to return to the Management Menu.Save and Exit LSI RAID Configuration Utility1 When RAID configuration, initialization and assigning hot spare iscompleted, press ESC in the Management Menu and select YES toexit the RAID Configuration Utility.2 Press Ctrl + Alt + Del to reboot the server.3 Now you can start to install OS.
