Acer Altos G700 series User Manual

Also see for Altos G700 series: Rack Installation Instructions User guide

Contents

Acer Altos G700 series User Manual Manual pdf 41 page image

31Operating system configurationThe Acer Altos G700 series server comes with Acer EasyBUILDTM thatallows you to conveniently install your choice of operating system. Tostart using EasyBUILD, follow the steps below.1 Locate the EasyBUILD System CD included in the system package.2 With your system turn on, gently press the CD-ROM drive Stop/Eject button.3 When the disc tray slides open, insert the EasyBUILD System CDwith the label or title side of the disc facing upward.Note: When handling the disc, hold it by the edges to avoidsmudges or fingerprints.4 Gently press the disc down to make sure that it is properlyinserted.Caution! While pressing the disc, be careful not to bend the disctray. Make sure that the disc is properly inserted before closingthe disc tray. Improper insertion may damage both the disc andthe CD-ROM drive.5 Gently press the drive Stop/Eject button again to close the disctray.6 The Acer EasyBUILD sequence begins. Follow all onscreeninstructions.For more information, refer to the EasyBUILD TM Installation guide.