67Super I/O ConfigurationThe Super I/O Configuration submenu lets you define the parametersettings for the system’s parallel and serial ports.Parameter DescriptionSerial Port 1(Address/IRQ)Serial port 1 address and IRQ (interrupt request) settingParallel PortAddressSets a logical base address for the parallel portParallel PortIRQAssigns an IRQ for the parallel port.If you install an add-on card that has a parallel portwhose address conflicts with the onboard parallel port, awarning appears on the screen. Check the parallel portaddress of the add-on card and change the address toone that does not conflict.Parallel PortModeSets the operation mode for the parallel portECP Mode DMAChannelAssigns a DMA (Direct Memory Access) channel for theECP (Extended Capabilities Port) parallel port function.This parameter is configurable only if you select ECP asthe operation mode.
