63• Press Esc while you are in any of the menu options to go to the Exit menu.• In any menu, you can load default settings by pressing F9. You can also press F10to save any changes made and exit the BIOS Setup Utility.Notes:Navigation keys for a particular menu are shown on the bottom of the screen.Help for parameters are found in the Item Specific Help part of the screen. Readthis carefully when making changes to parameter values.MainThe Main screen displays a summary of your computer hardware information, and alsoincludes basic setup parameters.Note: The screen above is for reference only. Actual values may differ.The table below describes the parameters in this screen. Settings in boldface are thedefault and suggested parameter settings.Parameter DescriptionSystem Time Sets the system time.Format: HH:MM:SS (hour:minute:second)Item Specific HelpSystem Time:System Date:Floppy Drive:Hard Disk:Quiet Boot:Power on display:LCD Display stretch:System Memory:Extended Memory:BIOS Ver.[11:21:00][09/11/2001]1.44MB, 3IBM-DJSA-220-(PM)[Enabled][Auto-Selected][Enabled]640 KB113664 KBV0.01½”Main System Devices Security Others Boot ExitF1 Help Select Item F5/F6 Change Values F9 Setup DefaultsEsc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit↑↓←→
