Software86English Setting the Boot drive sequenceUse the cursor up/down keys to select a boot device, then press − or + to change itsorder. Items with a “+” sign can be further expanded.Note: To use the “D2D Recovery”, first enable “System Boot From Hard DiskRecovery” (see “Advanced” on page 78), then change the boot sequence to makeD2D Recovery the first in the list. The “D2D Recovery” option is not available if“System Boot From Hard Disk Recovery” is disabled.ExitThis menu contains the exit options.Parameter DescriptionExit Saving Changes Saves your changes and exits the BIOS Utility.Exit DiscardingChangesDiscards your changes and exits the BIOS Utility.Load Setup Defaults Loads default settings for all setup parameters.
