|
Chapter 2 48AdvancedThe Advanced screen contains parameters involving your hardware devices. It also provides advancedsettings of the system.FIR PortsConfigure the system’s infrared port using options: Disabled and Enabled.The table below describes the parameters in the screen. Settings in boldface are the default and suggestedparameter settings.Description OptionFIR I/O Settings Sets the base I/O address and IRQ forInfrared port.COM1, 3F8, IRQ4/ COM2,2F8, IRQ3/ COM3, 3E8,IRQ4/ COM4, 2E8, IRQ3DMA Setting for FastIRSets a DMA channel for the printer tooperate in ECP mode. This parameter isenabled only if Mode is set to ECP.DMA1, DMA2, DMA3,Mode Setting Normak (16550), IrDA(HPSIR), ASK IR, FAST IRInsyde Software SCU May 20, 2003 5:40:09Main Advanced Security Boot Exit---------------------------------FIR Ports-------------------------------------FIR I/O settings--- -Mode Setting for IRDA-Infrared Ports(FIR)( ) Disabled ( ) Normal (16550)( ) COM1,3F8,IRQ4 ( ) IrDA (HPSIR)Parallel Port(LPT)( ) COM2,2F8,IRQ3 ( ) ASK IR( ) COM3,3E8,IRQ4 (Ԧ) FAST IRԩLegacy USB support(Ԧ) COM4,2E8,IRQ3--DMA Setting For Fast IR--( ) DMA1( ) DMA2( ) DMA3OK Cancel for block select. for item select.< Enter> for accept. for reject. activates accelerators. for Enable or Disable.ԩ
|
