System Utilities 2-9NOTE:NOTE:When prompted to enter password, three attempts are allowed before system halts.Resetting BIOS password may require computer be returned to dealer.Setting a Password 0Perform the following to set a new user or supervisor passwords:1. Use the and keys to highlight the Set Supervisor Password parameter and pressEnter. The Set Supervisor Password dialog box appears (Figure 2-4).NOTE:NOTE:To change an existing password, refer to Changing a Password.Figure 2-4. Setting a Password: Set Supervisor Password2. Type a new password in the Enter New Password field and press Enter.NOTE:NOTE:The following characters may be used in a password (Table 2-4):IMPORTANT:+ Use care when typing a password. Characters do not appear on the screen.3. Retype password in the Confirm New Password field and press Enter.4. If new password and confirm new password strings match, the Setup Notice dialogscreen is shown (Figure 2-5). If it is not, go to step 5.Table 2-4. Allowed CharactersA-Z Alphabets A through Z (Not Case Sensitive)0-9 Numerical Characters.- Dash= Equal Sign[ Left Bracket] Right Bracket. Period, Comma; Semi-colon/ Slash\ Back-slash
