System Utilities 2-9Setting a Password 0Perform the following to set supervisor password:1. Use the and keys to highlight the Set Supervisor Password parameter and pressEnter. The Set Supervisor Password dialog box appears.Figure 2-4. Set Supervisor Password2. Type a new password in the Enter New Password field. Passwords are not casesensitive and the length must not exceed 12 characters. Retype the password in theConfirm New Password field.NOTE:NOTE:The following characters may be used in a password:IMPORTANT:+ Use care when typing a password. Characters do not appear on the screen.3. Press Enter. After setting the password, the computer sets the User Passwordparameter to Set.NOTE:NOTE:Password on Boot must be set to Enabled to activate password feature.4. Press F10 to save changes and exit BIOS Setup Utility.Removing a Password 0Perform the following:1. Use the and keys to highlight Set Supervisor Password and press Enter. TheA-Z Alphabets A through Z (Not Case Sensitive)0-9 Numerical Characters.- Dash= Equal Sign[ Left Bracket] Right Bracket. Period, Comma; Semi-colon/ Slash\ Back-slash
