49English• Make sure that the printer is connected to a power outlet and that it isturned on.• Make sure that the printer cable is connected securely to the computer'sparallel port or a USB port and the corresponding port on the printer.I want to set up my location to use the internal modem.To properly use your communication software (e.g. HyperTerminal), you needto set up your location:1 Click on Start, Settings, Control Panel.2 Double-click on Phone and Modem Options.3 Click on Dialing Rules and begin setting up your location.Refer to the Windows manual.Note: Please note, on first booting your notebook, that you canskip the Internet Connection setup, as it is not necessary tocomplete the installation of your Operating System. After theOperating System is set up, you can proceed with the InternetConnection setup.I want to restore my computer to its original settings withoutrecovery CDs.Note: If your system is the multilingual version, the operatingsystem and language you choose when you first turn on thesystem will be the only option for future recovery operations.This recovery process helps you restore the C: drive with the original softwarecontent that is installed when you purchase your notebook. Follow the stepsbelow to rebuild your C: drive. (Your C: drive will be reformatted and all datawill be erased.) It is important to back up all data files before using this option.Before performing a restore operation, please check the BIOS settings.1 Check to see if Acer disk-to-disk recovery is enabled or not.2 Make sure the D2D Recovery setting in Main is Enabled.3 Exit the BIOS utility and save changes. The system will reboot.Note: To activate the BIOS utility, press during POST.
