32 Chapter 2AdvancedThe Advanced screen allows the user to configure the various advanced BIOS options.IMPORTANT:Making incorrect settings to items on these pages may cause the system to malfunction. Unlessyou have experience adjusting these items, we recommend that you leave these settings at thedefault values. If making settings to items on these pages causes your system to malfunction orprevents the system from booting, open BIOS and choose Load Optimal Defaults in the Exit menu toboot up normally.The table below describes the items, menus, and submenus in this screen. Settings in boldface are the defaultand suggested parameter settings.Parameter Description Submenu ItemsUSB Self-Healing Enter the USB Self-Healing menu. • Self-HealingXOCHI Self-HealingXEHCI Self-HealingSecured SetupConfigurationPrevents Plug and Play devices fromchanging system settings.N/AResetConfigurationDataClear the Extended System ConfigurationData (ESCD) area using this option.N/ALPC Port 80 Enable or Disable LPC Port 80. N/APCI Hot-PlugResourcesEnable or Disable Hot-Plug support. N/AI/O Set the amount of I/O (in bytes) available tothe Hot-Plug slots.N/AMemory Set the amount of Memory (in bytes)available to Hot-Plug slots.N/APre-fetchableMemorySet the amount of Pre-fetchable Memory (inbytes) available to the Hot-Plug slots.N/APhoenixBIOS Setup UtilityInformation Main Advanced Security Boot Power ExitItem Specific HelpXUSB Self-Healing Use this feature toSecured Setup Configurations: [No] tune USB timing eventReset Configuration Data: [No] for USB devicesLPC Port 80: [Enabled]PCI Hot-Plug Resources: [Enabled]I/O: [256]Memory: [2M]Pre-fetchable Memory: [2M]Enable Multimedia Timer: [Yes]Watchdog Timer: [Disabled]XHammer ConfigurationXIntegrated DevicesXPnP ConfigurationXIDE ConfigurationXiGPU - ChipsetLCD Panel type: [EDID compliant]F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup DefaultsESC Exit ←→ Select Menu Enter SelectXSub-Menu F10 Save and Exit
