210 Chapter 57. Plug in AC, keeping the HW Gap shorted, and press Power Button to power on the system till BIOS POSTis finished. Once BIOS POST has run, remove the tool from the HW Gap.8. Restart the system. Press the F2 key to enter BIOS Setup menu.If there is no Password request, the BIOS Password has been successfully cleared. Otherwise, follow thesteps and try again.BIOS Recovery by Crisis DiskBIOS Recovery Boot Block:The BIOS Recovery Boot Block is a special block of BIOS which is used to boot up the system with minimumBIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one in the casethat the BIOS flashing process fails.BIOS Recovery Hotkey:The system provides a function hotkey: Fn+Esc, for enabling the BIOS Recovery process when the system ispowered on during BIOS POST. To use this function, it is strongly recommended to have both the AC adapterand Battery plugged in. If this function is enabled, the system will force the BIOS to enter a special BIOS blockcalled Boot Block.Steps for BIOS Recovery using a USB crisis disk:A USB crisis disk can be used to recover system BIOS in the event of the BIOS being corrupted. To create thecrisis disk use the following steps:1. Plug in a USB flash disk. Back up any information on the disk, as this process will format your USB flashdisk.2. Launch the wincris.exe program to create a USB Crisis Disk. Click Start to initiate the process.3. Select the Quick Format option to format the disk and click Start. Follow the instructions on the screen tocreate the disk.4. Copy the KAYF0X64.fd BIOS file into the USB flash disk root directory.NOTE: Do not place any other *.fd file in the USB flash disk root directory.To use the Crisis USB key, do the following:1. Plug the USB flash disk into a USB port.2. Press Fn + ESC button then plug in AC power.The Power button flashes orange once.3. Press Power button to initiate system CRISIS mode.When CRISIS is complete, the system auto restarts with a workable BIOS.4. Update to the latest version of BIOS for this machine by the regular BIOS flashing process.
