Chapter 3 45Machine Disassembly and ReplacementThis chapter contains step-by-step procedures on how to disassemble the notebook computer formaintenance and troubleshooting.Disassembly RequirementsTo disassemble the computer, you need the following tools:• Wrist grounding strap and conductive mat for preventing electrostatic discharge• Flat screwdriver• Philips screwdriver• Plastic flat screwdriver• Plastic tweezersNOTE: The screws for the different components vary in size. During the disassembly process, group thescrews with the corresponding components to avoid mismatch when putting back the components.Related InformationThe product previews seen in the disassembly procedures may not represent the final product color orconfiguration.IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal andreplacement of components, ensure all available cable channels and clips are used and that the cables arereplaced in the same position.Replacement RequirementsNOTE: Cabling and components require adhesive to be applied during the replacement and reassemblyprocess.NOTE: During manufacture a cyanoacrylate glue is used provided by Holdtite Adhesives LTD. This is not aspecified requirement. The reassembler is free to select an alternative appropriate adhesive.Chapter 3
