Chapter 1 39Hardware Specifications and ConfigurationsNOTE: If you need to check PXE version, press F2 to enter BIOS then enable boot from LAN function. Afterthat, power off the system and remove the HDD. Last, reboot the laptop. Then you will see PXE versiondisplaying on the screen.ProcessorItem SpecificationCPU type Intel CPU Core2DualCore logic Intel ®965PM+ICH8M-ECPU package uFCPGA, Socket PCPU core voltage 0.944~1.3VCPU Fan True Value TableTEST Condition: 35W@Ambient 35 degree CCPU Temperature Fan Speed Acoustic LevelCore 0 Core 1 (rpm) (dBA)86 86 3700 3988 88 3450 36.591 91 3150 34.595 95 2800 31BIOSItem SpecificationBIOS vendor PhneoixBIOS VersionBIOS ROM type Flash ROMBIOS ROM size 1MBBIOS package 8-PIN SOICSupported protocols ACPI 1.0b/2.0/3.0, PCI 2.2, System/HDD Password Security Control, INT13h Extensions, PnP BIOS 1.0a, SMBIOS 2.4,BIOS Boot Specification(Compal, Phoenix, Intel),Simple Boot Flag 1.0, Boot Block, PCI Bus PowerManagement Interface Specification, USB1.1/2.0, IEEE 1394 1.0, USB/1394 CD-ROM Boot Up support, PC Card standard 1995 (PCMCIA 3.0Compliant Device), IrDA 1.0, Support HD audio, WfM 2.0, PXE 2.1(PrebootExecution Environment), BIS 1.0 (Boot Integrity Service ApplicationProgram Interface), PC2002 and PC2005 Compliant, Intel EngancedSpeedStep Technology,AHCI supportBIOS password control Set by setup manualSecond Level CacheItem SpecificationCache controller Built-in CPUCache size 4MB1st level cache control Always enabled2st level cache control Always enabledCache scheme control Fixed in write-back