Hardware Specifications and Configurations 1-33Bluetooth ModuleItem SpecificationsController AR3011Feature Single-chip Bluetooth v2.1/3.0 + EDR integrated solution USB 2.0 full-speed device interface with support forDevice Firmware Upgrade (DFU) SPI interface supports external serial flash devices Two on-chip 1.2V linear voltage regulators Integrated 32-bit CPU with 32KB data RAM and 256KBprogram RAM On-board PLL On-chip low power oscillator (LPO) WLAN coexistence interface Standard USB HCI interfaceController AR3012Feature Single-chip Bluetooth v4.0 solution USB 2.0 full-speed device interface with support forDevice Firmware Upgrade (DFU) I2 C or SPI interface supports external EEPROM or serialflash device, respectively 1.2V linear voltage regulator (LDO) Integrated 32-bit CPU with 128 KByte data RAM and 512KByte program ROM On-chip low power oscillator On-chip one-time programmable(OTP) memory Standard USB HCI interfaceController BCM2070Features Single-chip Bluetooth 3.0 HCI solution Point-to-multipoint operation External USB interface for data Onboard antenna and SMA RF connector Built-in power amplifier Coexistence supportController BCM20702Feature Bluetooth 4.0 + EDR compliant Programmable output power control meets Class1, Class2,Class3 requirements Supports mobile and PC applications without externalmemory Point-to-multipoint operation USB 2.0 compliant interface Etched PCB antenna Ultra-low power consumptionDownloaded from www.Manualslib.com manuals search engine
