Chapter 2 30Advanced BIOS FeaturesThe following screen shows the Advanced BIOS Features:The following table describes the parameters found in this menu. Settings in boldface are the default andsuggested settings.Parameter Description OptionsVirus Warning This item is used to enable or disable the viruswarning.EnabledDisabledQuick Power On Self Test Enable this item to shorten the power ontesting(POST) and have your system start upfaster. You might like to enable this item afteryou are confident that your system hardware isoperating smoothly.EnabledDisabledFirst /Second/Third BootDeviceThe items allow you to set the sequence of bootdevice where BIOS attempts to load the diskoperating system.Floppy, LS120, Hard Disk, CD-ROM,ZIP100, USB-FDD, USB-ZIP, LAN,Disabled (Disable this sequence).The sequence following the order ofFloppy, HDD and CD-ROM isrecommended.CD/DVD Drives Specifies the boot sequence from the availabledevicesPress [Enter]Boot Other Device This parameter allows you to specify the systemboot up search sequence.EnabledDisabledPhoenix-Award WorkstationBIOS CMOS Setup UtilityAdvanced BIOS FeaturesItem HelpfMenu Levelfmnlk : Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General HelpRemovable Device Priority [Press Enter]Hard Disk Boot Priority [Press Enter]CD-ROM Boot Priority [Press Enter]Virus Warning [Disabled]Quick Power On Self Test [Enabled]First Boot Device [Removable]Second Boot Device [Removable]Third Boot Device [Removable]Boot Other Device [Enabled]Boot Up Floppy Seek [Disabled]Boot Up NumLock Status [On]Gate A20 Option [Fast]Typematic Rate Setting [Disabled]Security Option [Setup]APIC Mode [Enabled]MPS Version Control for OS [1.4]OS Select For DRAM > 64MB [Non-OS2]HDD S.M.A.R.T. Capability [Disabled]Silent Boot [Enabled]Small Logo (EPA) Show [Disabled]Configuration Table [Disabled]BIOS Bootblock Protect [Enabled]f f12121212121212121212ffX Typematic Rate (Chars/Sec) 6X Typematic Delay (Msec) 250F5:Previous Values F7:Optimized DefaultsX