Acer Aspire T670 Service Manual

Also see for AcerPower FE: User guide

Contents

Acer Aspire T670 Service Manual Manual pdf 42 page image

Chapter 2 38Integrated PeripheralsAll onboard peripherals can be set up through this menu.Parameter Description OptionsOn-Chip Primary PCI IDE Enabled : Enable onboard 1st channel IDE port.Disabled : Disable onboard 1st channel IDE portOn-Chip SATA Mode Disabled : Disable this functionAuto : BIOS will auto detectCombined : Set On-Chip SATA mode to Combined, you can use up to 4 HDDs onthe motherboard; 2 for SATA and the other for PATA IDE.Enhanced : Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6HDDs to useNon-Combined : Set On-Chip SATA mode to Non-Combined, SATA will be simulatedto PATA mode.PATA IDE Set to Ch.1 Master/Slave : Set PATA IDE to Ch. 1 Master/Slave.Ch.0 Master/Slave : Set PATA IDE to Ch. 0 Master/Slave.SATA Port 0/2 Set to This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".If PATA IDE were set to Ch. 1 Master/Slave, this function will auto set to Ch. 0 Master/Slave.SATA Port 1/3 Set to This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".If PATA IDE were set to Ch. 0 Master/Slave,this function will auto set to Ch. 1 Master/Slave.USB 2.0 Controller Enable this item if the system supports USB 2.0 Enabled : Enable USB 2.0ControllerDisabled : Disable USB 2.0ControllerUSB Controller This item is used to enable or disable the on-chipUSBEnabled : Enable USB ControllerDisabled : Disable USB ControllerCMOS Setup Utility-Copyright (C) 1984-2005 Award SoftwareIntegrated PeripheralsOn-Chip Primary PCI IDE [Enabled]On-Chip SATA Mode [Enhanced]x PATA IDE Set to Ch.0 Master/SlaveSATA Port 0/2 Set to Ch.2 Master/SlaveSATA Port 1/3 Set to Ch.3 Master/SlaveUSB Controller [Enabled]USB 2.0 Controller [Enabled]USB Keyboard Support [Enabled]USB Mouse Support [Enabled]AC97 Audio [Auto]Onboard H/W LAN [Enabled]Onboard LAN Boot ROM [Disabled]Onboard Serial Port 1 [3F8/IRQ4]Onboard Parallel Port [378/IRQ7]Parallel Port Mode [SPP]x ECP Mode Use DMA 3KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General HelpF5: Previous Values F7: Default SettingsItem HelpMenu Level`